Bipolar Membrane Seawater Splitting for Hydrogen Production: A Review.

The growing demand for clean energy has spurred the quest for sustainable alternatives to fossil fuels. Hydrogen has emerged as a promising candidate with its exceptional heating value and zero emissions upon combustion. However, conventional hydrogen production methods contribute to CO2 emissions, necessitating environmentally friendly alternatives. With its vast potential, seawater has garnered attention as a valuable resource for hydrogen production, especially in arid coastal regions with surplus renewable energy. Direct seawater electrolysis presents a viable option, although it faces challenges such as corrosion, competing reactions, and the presence of various impurities. To enhance the seawater electrolysis efficiency and overcome these challenges, researchers have turned to bipolar membranes (BPMs). These membranes create two distinct pH environments and selectively facilitate water dissociation by allowing the passage of protons and hydroxide ions, while acting as a barrier to cations and anions. Moreover, the presence of catalysts at the BPM junction or interface can further accelerate water dissociation. Alongside the thermodynamic potential, the efficiency of the system is significantly influenced by the water dissociation potential of BPMs. By exploiting these unique properties, BPMs offer a promising solution to improve the overall efficiency of seawater electrolysis processes. This paper reviews BPM electrolysis, including the water dissociation mechanism, recent advancements in BPM synthesis, and the challenges encountered in seawater electrolysis. Furthermore, it explores promising strategies to optimize the water dissociation reaction in BPMs, paving the way for sustainable hydrogen production from seawater.

Polysaccharides gums in drug delivery systems: A review.

For the drug delivery system, drug carriers' selection is critical to the drug's success in reaching the desired target. Drug carriers from natural biopolymers are preferred over synthetic materials due to their biocompatibility. The use of polysaccharide gums in the drug delivery system has received considerable attention in recent years. Polysaccharide gums are renewable resources and abundantly found in nature. They could be isolated from marine algae, microorganisms, and higher plants. In terms of carbohydrates, the gums are water-soluble, non-starch polysaccharides with high commercial value. Polysaccharide gums are widely used for controlled-release products, capsules, medicinal binders, wound healing agents, capsules, and tablet excipients. One of the essential applications of polysaccharide gum is drug delivery systems. The various kinds of polysaccharide gums obtained from different plants, marine algae, and microorganisms for the drug delivery system application are discussed comprehensively in this review paper.

Performance and economic evaluation of a pilot scale embedded ends-free membrane bioreactor (EEF-MBR).

In this work, an embedded ends-free membrane bioreactor (EEF-MBR) has been developed to overcome the fouling problem. The EEF-MBR unit has a novel configuration where a bed of granular activated carbon is placed in the bioreactor tank and fluidized by the aeration system. The performance of pilot-scale EEF-MBR was assessed based on flux and selectivity over 140 h. The permeate flux fluctuated between 2 and 10 L.m-2.h-1 under operating pressure of 0.07-0.2 bar when EEF-MBR was used to treat wastewater containing high organic matter. The COD removal efficiency was more than 99% after 1 h of operating time. Results from the pilot-scale performance were then used to design a large-scale EEF-MBR with 1200 m3.day-1 capacity. Economic analysis showed that this new MBR configuration was cost-effective when the permeate flux was set at 10 L.m-2.h-1. The estimated additional cost for the large-scale wastewater treatment was about 0.25 US$.m-3 with a payback period of 3 years. KEY POINTS: • Performance of new MBR configuration, EEF-MBR, was assessed in long term operation. • EEF-MBR shows high COD removal and relatively stable flux. • Cost estimation of large scale shows the cost effective EEF-MBR application.

Multi-air pollution risk assessment in Southeast Asia region using integrated remote sensing and socio-economic data products.

Air pollution has massive impacts on human life and poor air quality results in three million deaths annually. Air pollution can result from natural causes, including volcanic eruptions and extreme droughts, or human activities, including motor vehicle emissions, industry, and the burning of farmland and forests. Emission sources emit multiple pollutant types with diverse characteristics and impacts. However, there has been little research on the risk of multiple air pollutants; thus, it is difficult to identify multi-pollutant mitigation processes, particularly in Southeast Asia, where air pollution moves dynamically across national borders. In this study, the main objective was to develop a multi-air pollution risk index product for CO, NO2, and SO2 based on Sentinel-5P remote sensing data from 2019 to 2020. The risk index was developed by integrating hazard, vulnerability, and exposure analyses. Hazard analysis considers air pollution data from remote sensing, vulnerability analysis considers the air pollution sources, and exposure analysis considers the population density. The novelty of this study lies in its development of a multi-risk model that considers the weights obtained from the relationship between the hazard and vulnerability parameters. The highest air pollution risk index values were observed in urban areas, with a high exposure index that originates from pollution caused by human activity. Multi-risk analysis of the three air pollutants revealed that Singapore, Vietnam, and the Philippines had the largest percentages of high-risk areas, while Indonesia had the largest total high-risk area (4361 km2). Using the findings of this study, the patterns and characteristics of the risk distribution of multiple air pollutants in Southeast Asia can be identified, which can be used to mitigate multi-pollutant sources, particularly with respect to supporting the clean air targets in the Sustainable Development Goals.

Optimization of haloacid dehalogenase production by recombinant E. coli BL21 (DE3)/pET-hakp1 containing haloacid dehalogenase gene from Klebsiella pneumoniae ITB1 using Response Surface Methodology (RSM).

Organohalogens, including monochloroacetic acid (MCA), are abundantly synthesized compounds for various industrial purposes. MCA is widely used as a raw material or as an intermediate compound for the production of pesticides, herbicides, fungicides, plastics, surfactants, shampoos, liquid soaps, and emulsion agents. Nonetheless, widespread and large-scale utilization of organohalogens might negatively impact life quality as these compounds are toxic to organisms and persistently present in the environment. An effort to decrease the effect of MCA pollutant is by performing bioremediation, taking advantage of microorganisms that produce haloacid dehalogenases, a class of enzymes that catalyze the breakage of carbon halogen bonds. In this sense, we have isolated Klebsiella pneumoniae ITB1 that could degrade MCA. The haloacid dehalogenase gene from this bacterium has been successfully cloned into pGEM-T vector and subcloned into pET-30a(+) expression vector to yield pET-hakp1 recombinant clone in Escherichia coli BL21 (DE) host cell. This research aimed to find an optimum condition for producing haloacid dehalogenase from this recombinant clone using Response Surface Methodology (RSM). Among the independent variables studied were the concentration of inducer, incubation temperature after the induction, and incubation period after the induction. We obtained the crude extract of the enzyme as cells' lysate after sonicating the bacterial cells. Haloacid dehalogenase activity against MCA substrate was determined by measuring the amount of chloride ions released into the medium of the enzymatic reaction using the colorimetry method, according to Bergmann and Sanik. The result indicated that the optimum condition for haloacid dehalogenase production by E. coli BL21 (DE3)/pET-hakp1 was observed when using 1.8 mM IPTG (isopropyl-ß-D-1-thiogalactopyranoside) as the inducer, followed by 4 h incubation with shaking at 37 °C, which was predicted to result in a maximum of 0.48 mM chloride ions from 0.50 mM of MCA substrate. This report provides an insight into applying RSM for optimization of enzyme production from E. coli recombinant clones.

Oil removal from spent bleaching earth of vegetable oil refinery plant using supercritical carbon dioxide.

The oil in the spent bleaching earth (SBE) matrix was successfully removed by applying the supercritical carbon dioxide (SCCO2) extraction technique in a semi-continuous flow-type system. The SCCO2 extraction process was conducted at 40-80 °C and 20-30 MPa with extraction time of ∼180 min. The color of SBE matrix changes from the dark to dark-pale color after the SCCO2 extraction treatment exhibiting the substances including oil in the SBE matrix were successfully removed. The extracted oil yield was around 95% when the SCCO2 extraction process was performed at 40 °C and 30 MPa with 10% ethanol addition as a co-solvent. The GC analysis showed that the prominent fatty acid constituents in the extracted oil are palmitic and oleic acids, furthermore it can be fed as a feedstock to produce biodiesel fuel. Next, it can be proposed that SCCO2 extraction system is a viable way to extract oil from the SBE matrix.

Molecularly Imprinted Affinity Membrane: A Review.

A molecularly imprinted affinity membrane (MIAM) can perform separation with high selectivity due to its unique molecular recognition introduced from the molecular-printing technique. In this way, a MIAM is able to separate a specific or targeted molecule from a mixture. In addition, it is possible to achieve high selectivity while maintaining membrane permeability. Various methods have been developed to produce a MIAM with high selectivity and productivity, with their respective advantages and disadvantages. In this paper, the MIAM is reviewed comprehensively, from the fundamentals of the affinity membrane to its applications. First, the development of a MIAM and various preparation methods are presented. Then, applications of MIAMs in sensor, metal ion separation, and organic compound separation are discussed. The last part of the review discusses the outlook of MIAMs for future development.

Electrochemical Methods for Water Purification, Ion Separations, and Energy Conversion.

Agricultural development, extensive industrialization, and rapid growth of the global population have inadvertently been accompanied by environmental pollution. Water pollution is exacerbated by the decreasing ability of traditional treatment methods to comply with tightening environmental standards. This review provides a comprehensive description of the principles and applications of electrochemical methods for water purification, ion separations, and energy conversion. Electrochemical methods have attractive features such as compact size, chemical selectivity, broad applicability, and reduced generation of secondary waste. Perhaps the greatest advantage of electrochemical methods, however, is that they remove contaminants directly from the water, while other technologies extract the water from the contaminants, which enables efficient removal of trace pollutants. The review begins with an overview of conventional electrochemical methods, which drive chemical or physical transformations via Faradaic reactions at electrodes, and proceeds to a detailed examination of the two primary mechanisms by which contaminants are separated in nondestructive electrochemical processes, namely electrokinetics and electrosorption. In these sections, special attention is given to emerging methods, such as shock electrodialysis and Faradaic electrosorption. Given the importance of generating clean, renewable energy, which may sometimes be combined with water purification, the review also discusses inverse methods of electrochemical energy conversion based on reverse electrosorption, electrowetting, and electrokinetic phenomena. The review concludes with a discussion of technology comparisons, remaining challenges, and potential innovations for the field such as process intensification and technoeconomic optimization.

Cane sugar crystallization using submerged vacuum membrane distillation crystallization (SVMDC).

The performance of Submerged Vacuum Membrane Distillation and Crystallization (SVMDC) for cane sugar concentration and crystallization was investigated in this study. Using hollow fiber membrane, the effect of operation parameters, such as feed concentration, feed temperature, and feed agitation were evaluated against the permeate flux. Following the operation parameters optimization, long-term SVMDC tests were performed using cane sugar model solution and raw sugarcane juice as the feed. Porous fouling layer was formed in test using cane sugar model solution which led to membrane fouling and wetting. However, sugar crystals were successfully formed in this test, despite under-saturated final feed concentration of 73.3°Brix. This indicated the occurrence of heterogeneous crystallization in the feed solution, that was induced by the sugar crystals detached from the membrane surface. In test using raw sugarcane juice as the feed, extremely low flux was observed due to the presence of impurities. However, membrane wetting did not occur as the implication of weak drag force occurred due to the low permeate flux. In this test, there was no observable crystal formed as the final feed concentration was much lower than the saturation concentration. In addition, the impurities hindered the interaction of sucrose molecules and disrupted crystal growth.

Combined ultrafiltration-electrodeionization technique for production of high purity water.

Electrodeionization (EDI) is the most common method to produce high purity water used for boiler feed water, microelectronic, and pharmaceutical industries. Commonly, EDI is combined with reverse osmosis (RO) to meet the requirement of EDI feed water, with hardness less than 1 ppm. However, RO requires a relatively high operating pressure and ultrafiltration (UF) as pretreatment which results in high energy consumption and high complexity in piping and instrumentation. In this work, UF was used as the sole pretreatment of EDI to produce high purity water. Tap water with conductivity 248 µS/cm was fed to UF-EDI system. The UF-EDI system showed good performance with ion removal more than 99.4% and produced water with low conductivity from 0.2 to 1 µS/cm and total organic compounds less than 0.3 ppm. Generally, product conductivity decreased with the increase of current density of EDI and the decrease of feed velocity and UF pressure. The energy consumption for UF-EDI system in this work was 0.89-2.36 kWh/m3. These results proved that UF-EDI system meets the standards of high purity water for pharmaceutical and boiler feed water with lower investment and energy consumption than RO-EDI system.